Loading... Please wait...

Our Newsletter

Wade Model CG-10N Commercial Guyed

email for pricing and shipping
431.00 LBS
Free Shipping

Product Description



With free shipping you have to pick up In Brantford or TrentonOntario,we also might have at our EdmontonAlberta Warehouse.I will set this up once you order.

 If you wish to have a shipping quote send information before you order to ackert@execulink.com


Wade's CG-10N 77' Commercial Guyed tower is packaged complete with (10) 8' sections, a top and rotor plate with model 244A mast clamp installed, 4 guy stations, concrete base stubs, and our special nuts, bolts and washers.  Wade's Commercial Guyed towers are ideal for supporting communications, civil and amateur antennas.


  • Enhanced in both leg profile and taper facilitating an easier installation and improved tower structure.
  • 8 foot tower sections.
  • Twist-reducing beaded-channel legs riveted together with "X" braces.
  • Legs and cross braces are galvanized steel.
  • Rivets are solid aluminum, anodized.
  • Special nuts and bolts are 1/2" O.D. and heat treated.
  • Straight sections fit smoothly together, since all leg bottoms are accurately swaged for a perfect fit.
  • Special three-size guy stations are strong and reliable. They are attached every three sections from the base up (except for CG-19N) and at the top of the tower.
  • Designed to withhold impact load of a climber in case of a fall in accordance with CSA-S37-13. See installation instructions for more information.*

LOAD LIMITS:  Towers are designed to support a net antenna weight of up to 80 lbs. with a horizontal wind load of up to 300 lbs. plus rotor and 2” O.D. x 10 ft. mast.**

NOTE:  Never install a tower or tower section found to have missing or damaged components. Only Wade replacement components or hardware may be used on DMX products. Failure to exercise this caution can result in injury or death. Consult distributors for replacement sections or parts if required.

* Towers have not been tested to be in compliance with other sections of CSA-S37-13.

** Tower load limits are based on survival, and cannot be stamped by a licensed engineer.

  • Tower Height: 77' (23.5m)
  • Max Load: 80 lbs

Dimensions: 96" L x 115" W x 23" H (243.8 cm L x 2921.1 cm W x 58.4 cm H)

Weight: 431 lbs

Shipping Dimensions: 96" L x 115" W x 23" H

Shipping Weight: 431 lbs

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Wade Model CG-10N Commercial Guyed to your wish list.

You Recently Viewed...